Anycubic Wash & Cure 3 Plus - Print cleaning and drying device (WS3LA0WH-Y-O)
Tuotekuvat ovat havainnollistavia. Alkuperäinen tuote voi vaihdella, joten katso tuotetiedot tuotekuvauksesta.
Hinta
€ 180.80Verkkokaupan hinta voi vaihdella kaupan hintojen mukaan.
Maksuerät
- alkaen € 5.11 /kuu.
- alkaen € 5.11 /kuu.
Toimitusaika ja vaihtoehdot
- 4-6 päivää
- 4-6 päivää
- 4-6 päivää
- 4-6 päivää
- 4-6 päivää
Tuotteen Kuvaus
AnyCubic Wash & Cure 3 Plus Print Cleaning and Drying Device Wash & Cure 3 Plus is a reliable washing and drying device that will allow you to take care of the proper finishing and curing of your prints. It features a large design that will easily accommodate even larger models. It is also distinguished by surprisingly quiet operation. You can also choose from different operating modes and manually adjust the cleaning or curing time. Larger capacity The product will allow you to easily clean even larger prints. The capacity of its basket is as much as 7.6 liters, and the total capacity of the cleaning module is as much as 12 liters. This is enough to accommodate models of different sizes! On the other hand, the dimensions of the curing area are ø220 x 260 mm. Reliable curing Thanks to its carefully thought-out design and improved LED arrangement, the device guarantees excellent, even curing results. What's more, the set includes an innovative UV lamp with a bendable design, which provides an energy level of 30,000 μW/cm2 and a radiation range of 1-3 cm. With its help, you can, for example, cure the details of your models. Improved basket design The device's basket is made of rust-resistant double-layer PP plastic, and it allows you to clean models placed on the platform. You can also choose from 2 available heights - 150 mm and 250 mm. This makes it easy to adjust the product to the size of your print and ensures maximum IPA efficiency - you only use as much as you actually need! Cure more models at the same time You'll also have a two-layer curing platform at your disposal so you can dry more models at the same time. This will save you time and avoid unnecessary use of the device! Easy operation The device offers 3 modes to choose from - cleaning, curing, and FlexiCure enhanced curing using the included UV lamp. You can also manually adjust the cleaning or drying time between 1-30 minutes. Convenient operation of the Wash & Cure 3 Plus model is enabled by a built-in touch panel. Quiet operation Don't worry that the noise generated by the device will interfere with your work or rest. The sealed design and optimized software of the Wash & Cure 3 Plus makes its volume level only about 65 dB. So you can enjoy peace of mind! Included Device for washing and drying printsCleaning moduleCleaning basketStick x4Curing tableUV lamp with bendable designAllen wrench setPower supplyUser manual ManufacturerAnyCubicModelWS3LA0WH-Y-OUV light source14 diodes 405 nm + lamp with adjustable designOperation modesCleaning, curing, FlexiCureRated power36 WInput voltage100-240 V 50/60 HzCleaning / curing time adjustment1-30 minMax. dimensions of the model to be curedø220 x 260 mmMax. dimensions of the model to be cleanedWith platform: 228 x 128 x 250 mm; Without platform: 228 x 128 x 260 mm;Control panelTouch buttonsMaterial (cleaning basket, cleaning module, curing table)PPUV lamp height380 mmDimensions312 x 267 x 434 mmWeight5.7 kg