FRACTAL DESIGN Meshify 2 RGB ATX case, black (FD-C-MES2A-06)

The Meshify 2 RGB is a boldly designed performance and adaptable ATX / E-ATX case with a screwless glass panel on the side, a removable roof, a removable mesh front panel with a USB-C port, and a spacious interior with an extensive cooler and hard drive sled support.

The spacious case can accommodate a larger motherboard up to E-ATX size as well as 360 mm coolers on the front or ceiling and 280 mm on the bottom. The case has 11 hard disk/SSD sleds and four SSD frames, and the included Multibracket can be used to convert unused fan slots into hard disk slots. A total of nine 120/140 mm fans can be installed in the case, four 140 mm Aspect 14 RGB fans are pre-installed in the case, three of which are on the front panel and one on the back.

At the bottom of the case there is a two-part and removable perforated power supply cover where you can hide the cables. The front panel has an integrated RGB lights control button that turns on Fractal's iconic aurora effect. The case can be opened without tools from three sides; from the roof, side panel and front, and the inner wall is also movable.

Features:

• Case type: Mid tower, steel
• Internal 2.5 seats: 2
• Internal 2.5"/3.5" slots: 6, total 14 slots + 3 x Multibrackets
• Dimensions: 542 x 240 x 474 mm
• Front panel connections: 1 x USB 3.1 Ge 2 Type-C, 2 x USB 3.0, Audio I/O, power button, reset button, RGB controller
• Dust filters on the roof, front and bottom
• Additional card slots: 7 + 2
• Maximum height of processor cooler: 185 mm
• Maximum video card length: 450 mm
• Power supply support: ATX
• Maximum length of the power supply: 250 mm when the hard drive sled is installed
• Weight: 11.1 kg
• Motherboard support: ATX, Micro-ATX, Mini-ITX, EATX (up to 285 mm)
• Cable management: 30 mm space, grommet and Velcro straps
• Supplied with four pre-installed Aspect 14 RGB 140 mm fans, a small accessory box and a large accessory box with hard drive sleds

Fan locations:

• Front: 3 x 120 / 140 mm
• In the ceiling: 3 x 120 / 140 mm
• At the bottom: 2 x 120 / 140 mm
• Rear: 1 x 120 / 140 mm

Liquid cooler support:

• Front: 360 / 280 mm
• In the ceiling: 360 / 280 mm
• At the base: 240 mm
• Back: 120 mm