Bambu Lab A1 Combo 3D printer (PF002-A+SA005-EU)

The Bambu Lab A1 3D printer represents the cutting-edge technology that is revolutionising the 3D printing industry. With innovative additive manufacturing technologies, this printer sets new standards for accuracy, speed and versatility. Its sleek design and user-friendly interface make the Bambu Lab A1 the perfect addition to any professional work environment or creative studio. The all-new AMS lite is sleek and reliable, making multicolor 3D printing accessible to everyone.

Central Features:

• Active Flow Compensation: The A1 uses a high-resolution, high-frequency eddy current sensor to measure nozzle pressure. The algorithm actively compensates the flow rate based on measurements to ensure accurate extrusion.
• Fully automatic calibration:The A1 performs all calibrations independently. It automatically calibrates the Z-offset, platen level, vibration resonance and nozzle pressure for each print job.
• Quick-change nozzle:A new generation quick-change nozzle that attaches and detaches with a single clip.
• Active motor noise reduction:The A1 calibrates parameters to match the slight differences in each motor, compensating for unwanted motor noise.
• Bed Slinger, CoreXY speed and quality:Full metal slideways, rigid frame, nozzle pressure sensor, acceleration sensors, powerful MCU and advanced mobile control system enable high quality printing with up to 14 minutes of benchy printing, straight out of the box without special materials.
• Sync to Bambu Studio and Bambu Handy: You can control and monitor the printer remotely via the Bambu Studio or Bambu Handy app. The built-in camera also allows you to record time-lapse videos.

Specifications:

• Recommended filaments: PLA, PETG, TPU, PVA
• Compatible filament diameter: 1.75 mm
• Maximum nozzle temperature: 300 ºC
• Avoid filament system: Yes
• Extruder type: Direct drive
• Recommended maximum print speed: 500 mm/s (depending on material)
• Print area: 256 mm x 256 mm x 256 mm
• Maximum plate temperature: 100 ºC
• Printing substrate surface: PEI sheet
• Printing substrate mounting: magnetic
• Printing chamber during process: open
• Number of extruders: 1

Mounting space/requirements:

• Overall dimensions: 385 mm x 410 mm x 430 mm
• Net weight: 8 kg
• Maximum power consumption: 1300 W
• Voltage: AC: 100 V / 240 V (50-60 Hz)

Accessories:

• HEPA filter: No
• Filament end-of-life sensor: Yes
• Filament clogging sensor: Yes
• Power cut-off system: Yes
• Touchscreen: Yes
• Camera: Yes

Connections:

• USB port: No
• WLAN: Yes