Karhu GH baseball helmet, white, S / M (55606.5)

The safe, air-conditioned and light Karhu GH washing helmet is extremely comfortable to wear. Karhu baseball helmets are EC type tested. The products comply with the requirements of VP No. 1406/93 (CE).

• Material: outer surface: HD / PE plastic; inner part: two-part PE foam with shaped foam pads
• Size: S / M (51-58 cm)
• Weight: 300 g

Instructions for use: The helmet has two parts fastened with screws, which are fastened to each other with adjusting screws. Before using the helmet, take the following steps: 1. Inspect the helmet for damage. 2. Check the snap fastening of the helmet chin strap. No accessories may be attached to the helmet.

Fitting: Loosen the four adjusting screws on the helmet a few turns. Put the helmet on your head so that its front edge is about the thickness of your fingers around the eyebrows. To adjust the size of the helmet, fit its front over the back until the helmet fits snugly at the end. Tighten the adjusting screws. Be careful that both sides of the helmet are level. Adjust the chin strap to a sufficient tension. Make sure the helmet stays well away.

Care: Regular inspection of the helmet is a necessary procedure. If the helmet has been severely impacted or has scratches or surface damage, or if the helmet's protective capability is otherwise limited, the helmet must be replaced immediately. Before and after each use, make sure that the helmet is intact. Do not change the structure of the helmet in any way. Do not use paints, cleaners, adhesives or chemicals. Cleaning is done with mild soapy water.

Bear helmet models and their use: Sizes XS, S / M and L / XL are allowed for use in all official baseball matches and drills. The helmet must be replaced after three (3) years of use.